Electrolux
Washer Repair
Full-size front-load washers from the Swedish group, commonly bought as a set with an Electrolux dryer.
Mon–Sat, 8am–8pm
- 3 washer types
- 6 problems we see
- 9 error codes
Book a visit
Three short steps, about a minute.
or call (844) 398-5711
Loading appointment form…
The appointment form couldn’t load. Please try again.
Electrolux washers,
specifically.
Electrolux sells front-load washers in the US, grouped into series from 300 to 700 that can be read from a digit in the model number. Its owner center explains each E-code, and a notable number of them trace back to how the washer was installed.
The Electrolux lineupBuilds3 washer types
Front-load washer · Stackable washer · Compact washer
Called out forWasher Not Filling
and 5 more problems on Electrolux
Repairs we do10 repairs, on any make
Diagnostic visit · Drain pump repair · Water inlet valve repair · Door lock and lid switch repair
Error codesE11 · E21 · E35 · E41 · E42
9 Electrolux codes with a page of their own
The Electrolux
lineup.
Electrolux builds 3 of the 4 washer types this site covers. Which one decides how the visit is planned.
All washer typesFront-load washer
3 of the problems we see on Electrolux come up on it Front-load washer repair StackableStackable washer
3 of the problems we see on Electrolux come up on it Stackable washer repair CompactCompact washer
3 of the problems we see on Electrolux come up on it Compact washer repairWhat is particular
to Electrolux.
Electrolux front-loaders come in 300 to 700 series, with StainSoak on 600 and 700 models and Perfect Steam on select models, and an approved kit stacks a matching dryer on top. Series and options change the controls, not the basic drain and lock design.
The model number gives the series
Electrolux manuals cover several series at once, and the series is part of the model number, for example a 600 series model. Knowing it tells you which cycles and options the washer should have before judging a missing feature as a problem.
It detects swapped hoses
If the hot supply is on the cold inlet and the cold on the hot, the washer notices and flashes HO then SE. Electrolux also lists reversed lines as a known cause behind its long-fill and long-drain codes.
The standpipe has a window
The manual wants a standpipe of at least 23.6 inches to stop siphoning and no taller than 8 feet for the pump to empty the drum in time. Many drain complaints on this brand are installation, not parts.
A door stand vents the drum
A spring-loaded stand below the door latch props the door open between washes to cut humidity and odor. Using it is the first step against musty smells.
Parts
Door locks, drain pumps and inlet valves for current Electrolux front-loaders can usually be ordered without trouble. Series-specific control and dispenser parts may take longer.
Repair or replace
Drain, fill and door lock repairs on an Electrolux front-loader are worth doing. Worn drum bearings or a damaged tub on an older machine make replacement worth weighing.
Book your Electrolux visitWhat we are
called out for.
On Electrolux, most often washer not filling.
All problemsElectrolux error codes
E11Water supplyE21DrainE35Water supplyE41Door and lid lockE42Door and lid lockHO SEWater supply
Not a
Electrolux?
Electrolux is one of 14 washer makes on this site. The other 13 each have a page of their own.
All 14 brandsElectrolux washer repair,
where we come out.
9 metros, each with its own page.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions about
Electrolux washers.
My new Electrolux washer shows a code in its first month. Who should I call?
How much water pressure does an Electrolux washer need?
How do I use the door stand on my Electrolux?
Back to your everyday
Book your Electrolux visit.
Have the washer's model number ready — on Electrolux it decides which parts come on the first visit.